What is the error code 0x80070035(The Network Path Was Not Found) and when does it happen?
If you’re looking to share data between devices, the most typical method of thinking is to share files between two systems on that same network. However, some users experience this error when sharing resources using this method:
Error code Code: 0x80070035 (The Network Path was not found)
Code of Error: 0x80070035(The Network Path was not found)?
It could be caused by many causes. One of the primary causes could be due to the long name of the computer that you are connecting to. To fix this issue change the name and compress the name of the computer you wish to connect to and then try the same procedure. If this is the sole error, you will not be able to see the error when testing the process once more. If this isn’t the case, test a few of the methods listed below to solve this problem.
The best four methods to fix error codes: 0x80070035
- Verify that the device is shared
In the beginning, it is recommended to confirm that your drive shares in order to help with problems with the Network Path was not Found error.
How to Verify the Shared Device
First step: Click the Drive you’d like to access on your target PC and choose the option Properties.
Step 2. When the window that opens Click in the tab Sharing, then select the Advanced share option. This will allow you to go on.
Step 3. Make sure to select Share this folder, and confirm that the share’s name appears on the screen that appears. Click Apply and click Yes to verify. You can now determine if the issue has been fixed or not.
- Ping the IP Address of the Target Computer
It is important to determine to ensure that it is functioning properly to resolve this Network Path was not Found error.
How to Ping the IP Address of the Target Computer
- Use the Windows key and the R key simultaneously to start Run. Run dialog.
- Enter cmd into the box.
- Enter to continue. Enter to continue to the computer you want to use.
Step 2. On the command line window of the control panel Enter command ipconfig/all then press Enter.
Step 3. Scroll down to find the IPv4 address and then remember it.
Step 4: On the primary computer, go to the command prompt and enter command ping. Hit Enter. Check to see if you receive four confirmations or not.
- When four confirmed replies are not received you should start the Network Adapter Troubleshoot.
Run the system again to see if the issue has been fixed or not.
- Reinstall Network Adapter driver
Another method to fix this Network Path was not Found error is to install the driver for the network adapter.
How to Reinstall Network Adapter Driver
Method 1: To access the targeted computer you need to press the Windows key and the R key simultaneously for the Run dialog. Type the devmgmt.msc command into the box. Click OK to continue.
Step 2. Within the window that pops up Expand the Network Adapters and click right-click each adapter. After that, you can select to update the driver in order to proceed.
You will now be able to find instructionsto follow, then, restart your device to determine if the Network Path was not found error has been resolved or not.
- Enable NetBIOS over TCP/IP
Here’s our fourth approach to fix Error code (0x80070035).
Users can fix this issue by turning on NetBIOS via TCP/IP. To ensure that an internal network can be fully functional you’ll have to verify that the NetBIOS Helper TCP/IP program is in operation in the background all of the time.
How do you enable NetBIOS over TCP/IP
- To access the targeted computer use the Windows key and R keys together to display the Run dialog. Type the ncpa.cpl command into the box. Click OK to continue.
Step 2. Right-click the network , and select Properties.
Step 3. Click twice on Internal Protocol Version 4 (IPv4).
step 4 Within the window that pops up select Advanced Settings to proceed.
- Within the window that pops up, click the”WINS” tab. Select the option to enable NetBIOS over IP and select OK to proceed.
You can now determine if the error has been fixed or not.Whenever you experience the error code: (0x80070035) (The Network Path Was Not discovered) Follow these efficient ways to fix the error. There are many reasons that can trigger this error. The firewall, or even the antivirus software may be the main cause of an Network Path not Found error. Turning off antivirus and firewalls temporarily can assist you if this happens to be the situation. Other than these four options there are alternatives that aid. You can look them up online.